How to Flash Stock Firmware file on your Realme C2

Rooting an Android mobile phone is a really usual technique nowadays. Normally, people that want some extra control over their tool do this. There is no question that is rooting voids your device’s service warranty and, at the same time, can get you in trouble. It can trigger major damage to your gadget in regards to protection, can brick your tool, etc. There are two choices to repair this point by seeing the nearest filling station or by flashing the important data by yourself. There are countless devices available out there as well as one such device is SP Flash Device

Flashing Stock ROM or Customized ROM making use of Smart Phone Flash Tool is one of the simplest methods of doing this innovative procedure. SP Flash Tool is a software that can be mounted on your PC or Laptop and additionally aids you to flash Customized ROM, Stock ROM, unbrick bricked tools, format/erase and so on. This software is specially created for devices running MediaTek processors. In today’s article, we will certainly tell you how to Flash Stock ROM of Realme C2 using SP Flash Tool.

Pre-requisites:

1. You will require a PC or Laptop
2. Battery should be charged up to 60 to 70 per cent.
3. Use original Realme C2 USB cable.
4. Realme C2 Stock ROM file - Download
5. Realme C2 USB Drivers for PC - Download
6. SP Flash Tool Latest Version (v5.1936)

Steps to Flash Stock Firmware file of your Realme C2 

Using the SP Flash Tool, you can flash Realme C2. Additionally, do see to it that you have installed Realme C2 USB drivers effectively on your PC before flashing any firmware file.

Step 1: To begin with the flashing process of your Realme C2, Download and install Android USB Driver on your Windows PC. You can skip to the next step if you have already installed them on your PC.

Step 2: Switch off your Realme C2 Smartphone and remove its battery if it is removable.

Step 3: Now Download the Stock ROM Firmware flash file for Realme C2. Then extract it on your PC.

Step 4: Unzip the SmartPhone Flash Tool and also download and install SP Flash Tool software from the above pre-requisites section.

Step 5: Download flash recovery image: Flashing stock rom is not easy; it takes patience and time. To flash Realme C2, make sure you have flash recovery image ready for your device model.

Step 6: Load scatter file: Now click on the “. exe” data to run the file. The software will ask you to fill the scatter file. Click Scatter Loading (Load Scatter file of Realme C2).

Step 7: Uncheck all packages: Now, you need to uncheck all boxes from the SP flash tool.

Step 8: Load Recovery Image: Go to and click Recovery box from the list and load recovery image of your Realme C2 android device

Step 9: Recovery box is checked before you connect your Realme C2, in recovery image location (Uncheck all the remaining boxes).

Step 10: After connecting your tool with Computer or Laptop, click download button ahead and click YES.

Step 11: Now to start the Flashing process, you should remove your Realme C2 battery (only if the battery is removable). Insert it again, Hold the Volume Down and Volume Up Button together and Connect your Realme C2 to Computer or Laptop using USB Cable (Keep the Volume Down and Volume Up key until your computer detects the phone.)

Step 12: Once, you are practically done with the Flashing process; it will be triggered with a green circle.

Step 13: That’s it! You have successfully flashed stock ROM in Realme C2.